{"id":2813,"date":"2011-10-11T21:59:36","date_gmt":"2011-10-11T21:59:36","guid":{"rendered":"http:\/\/www.wikisee.info\/?p=2813"},"modified":"2016-08-09T12:08:05","modified_gmt":"2016-08-09T12:08:05","slug":"xrio-3g-setup","status":"publish","type":"post","link":"https:\/\/wiki-see.info\/wp\/2011\/10\/11\/xrio-3g-setup\/","title":{"rendered":"XRIO 3G SETUP"},"content":{"rendered":"

SSH to the Management Server on\u00a080.74.17.43<\/span><\/p>\n

Username: root
\nPassword: xr10p455w0rd<\/span><\/p>\n

Linux vm DHCP Server :<\/span><\/p>\n

SSH to the relevant IP, typically 172.31.3. Login with the following details<\/span> :<\/p>\n

Username: admin
\nPassword: password<\/span><\/p>\n

Firmware Upgrade<\/span> :<\/p>\n

You now need upgrade the firmware to the latest version<\/span>.<\/p>\n

    \n
  1. Type <\/span>“firmware update http:\/\/172.31.3.254\/2.2\/rc3\/XrioUBM_2.2.110727.163001.bin<\/span>“<\/li>\n
  2. If external use<\/span> “firmware update<\/span> http:\/\/80.74.17.43\/2.2\/rc3\/XrioUBM_2.2.110727.163001.bin<\/a>“<\/li>\n
  3. Once updated run<\/span> – “firmware patch get<\/span> http:\/\/172.31.3.254\/2.2\/rc3\/ReplacementFiles.zip<\/a>“<\/li>\n
  4. Once updated type Hard \u2018reboot\u2019 Device. \u201cUnplug Power Cord\u201d…<\/span><\/li>\n<\/ol>\n

    !<\/p>\n

    ENSURE THAT THE UBM HAS THE REQUIRED LINKS LICENCES TO SUPPORT
    \nBOTH 3G and ADSL. <\/span><\/em><\/strong><\/p>\n

    Requesting a License<\/span><\/strong><\/p>\n

    We now have access to a licensing portal…see Matt for details<\/span>.<\/p>\n

    Once the license is ready run…<\/span><\/p>\n

    <\/strong><\/p>\n

    license activate http:\/\/portal.xrio.com\/licenses\/<\/span><\/strong><\/p>\n

    !<\/p>\n

    REQUIRED FOR 3G UNITS ONLY ——–<\/span> <\/strong><\/em><\/p>\n

    After reboot the device should have detected the mobile ports, you can check this as per below<\/span>.<\/p>\n

      \n
    1. show mobile-port <\/span>(This should show two ports connected<\/em><\/span>)<\/li>\n<\/ol>\n

      You can now start configuring the unit as normal…<\/span><\/p>\n

      MOBILES<\/span><\/strong><\/p>\n

      The mobile ports need their APN setting depending on which mobile operator is being used…<\/span><\/p>\n\n\n\n\n\n\n\n
      Operator<\/span><\/strong><\/td>\nAPN<\/span><\/strong><\/td>\nUsername<\/span><\/strong><\/td>\nPassword<\/span><\/strong><\/td>\n<\/tr>\n
      Vodafone<\/span><\/td>\nInternet<\/span><\/td>\nweb<\/span><\/td>\nweb<\/span><\/td>\n<\/tr>\n
      O2<\/span><\/td>\nmobile.o2.co.uk<\/span><\/td>\nweb<\/span><\/td>\nweb<\/span><\/td>\n<\/tr>\n
      T-Mobile<\/span><\/td>\ngeneral.t-mobile.uk<\/span><\/td>\nweb<\/span><\/td>\nweb<\/span><\/td>\n<\/tr>\n
      3<\/span><\/td>\n3gnet<\/span><\/td>\nweb<\/span><\/td>\nWeb<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      To configure do the following…<\/span><\/p>\n

      configure
      \nedit mobile-port Mobile1<\/span>
      \napn (enter the value from above<\/em>)
      \nexit
      \nedit mobile-port Mobile2<\/span>
      \napn (enter the value from above<\/em>)
      \nexit
      \ncommit
      \nyes<\/span><\/p>\n

      MOBILE LINKS<\/span><\/p>\n

      add link mobile1<\/span> (make sure lower case<\/em>)
      \ntype mobile
      \nport Mobile1<\/span>
      \nusername web
      \npassword web
      \nhealthcheck 8.8.8.8
      \ndownload 1000
      \nupload 1000
      \nexit
      \nadd link mobile2<\/span>
      \ntype mobile
      \nport Mobile2<\/span>
      \nusername web
      \npassword web
      \nhealthcheck 8.8.8.8
      \ndownload 1000
      \nupload 1000<\/span><\/p>\n

      3G TUNNELS<\/span><\/p>\n

      add tunnel siteref-3g1<\/span>
      \n<\/em>type tcp
      \nendpoint-remote <IP OF VBOND<\/em>>
      \nendpoint-local mobile1Endpoint
      \nvirtual-remote 10.X.1.1 \u2013 this <\/em>value is determined by the next available IP on the VBond
      \n<\/em>virtual-local 10.X.1.2 \u2013 As above but using .2 as 4th<\/sup> octet instead<\/em>
      \ndownload 1000
      \nupload 1000
      \ncompress disable
      \nencrypt disable
      \nencrypt-key ABC123
      \nexit
      \ncommit
      \nyes <\/span><\/p>\n

      Repeat process for additional tunnel using siteref-3g2 as the second tunnel name and
      \nincrementing the X value in the virtual tunnel by one<\/span>.<\/span><\/em><\/p>\n

      ADSL PORTS<\/span><\/p>\n

      edit adsl-port ADSL1<\/span>
      \nencapsulation vcmux
      \nprotocol pppoa
      \nvci 38
      \nvpi 0
      \nexit
      \nedit adsl-port ADSL2<\/span>
      \nencapsulation vcmux
      \nprotocol pppoa
      \nvci 38
      \nvpi 0
      \nexit
      \ncommit
      \nyes <\/span><\/p>\n

      ADSL LINKS<\/span><\/p>\n

      add link adsl1<\/span><\/span>
      \ntype adsl
      \nport adsl-port1<\/span>
      \nhealthcheck 80.74.16.173
      \nusername RADIUSUsername1@maxbond.co.uk<\/em>
      \n<\/a>password password<\/em>
      \ndownload 8000
      \nupload 1000
      \nexit
      \nadd link adsl2<\/span>
      \ntype adsl
      \nport adsl-port2<\/span>
      \nhealthcheck 80.74.16.173
      \nusername       RADIUSUsername2@maxbond.co.uk<\/em>
      \n<\/a>password password<\/em>
      \ndownload 8000
      \nupload 1000
      \ncommit
      \nyes<\/span><\/p>\n

      Repeat for further 2 links if an N4<\/span><\/em><\/p>\n

      ADSL TUNNELS<\/span><\/p>\n

      add tunnel<\/span> siterefmaxbond1<\/span>
      \n<\/em>type gre<\/span>
      \nendpoint-remote <IP OF VBOND<\/em>>
      \nendpoint-local adsl1Endpoint
      \nvirtual-remote 10.X.1.1 \u2013 this <\/span>value is determined by the next available IP on the VBond<\/span>
      \n<\/em>virtual-local 10.X.1.2 \u2013 As above but using .2 as 4th<\/sup> octet instead
      \n<\/em>download 8000
      \nupload 1000
      \nexit
      \ncommit<\/span><\/p>\n

      Repeat process for additional tunnels<\/span><\/em><\/p>\n

      <\/strong><\/p>\n

      LAN<\/span><\/p>\n

      add lan-interface lan1<\/span>
      \naddress 10.2.X.254\/24
      \nport Port1<\/span>
      \nexit
      \ncommit
      \nyes<\/span><\/p>\n

      DHCP<\/span><\/p>\n

      edit system service<\/span> dhcp<\/span>
      \nstart address 10.2.X.50
      \nend address 10.2.X.150<\/span>
      \ndns-primary 172.18.192.10
      \ndns-secondary 172.16.0.11
      \nwins-primary 172.18.192.10
      \nwins-secondary 172.16.0.11<\/span>
      \ngateway 10.2.X.254
      \ndomain-name wates.co.uk
      \nlease-time 43200
      \nlan lan1<\/span>
      \nsubnet 10.2.x.0\/24<\/span>
      \nexit
      \ncommit
      \nyes
      \nenable system service dhcp<\/span><\/span><\/p>\n

      TEAM<\/span><\/p>\n

      3G Team<\/span><\/em><\/strong><\/p>\n

      add team<\/span> team1-3g<\/span>
      \nalgorithm distribute
      \nadd member tunnel<\/span> <\/span>siteref-3g1<\/span>
      \n<\/em>exit
      \nadd member tunnel<\/span> siteref-3g2<\/span>
      \n<\/em>exit
      \nexit
      \ncommit<\/span><\/p>\n

      ADSL Team<\/span><\/em><\/strong><\/p>\n

      add team team1-adsl<\/span>
      \nalgorithm static_bonding
      \nbackup-team team1-3g<\/span><\/span>
      \nadd member tunnel<\/span> siterefmaxbond1<\/span>
      \n<\/em>exit<\/span>
      \nadd member tunnel<\/span> siterefmaxbond2<\/span>
      \n<\/em>exit
      \nexit
      \ncommit<\/span><\/p>\n

      POLICY<\/span><\/p>\n

      add policy<\/span> policy1<\/span>
      \nsource lan1Subnet
      \ndestination any
      \nteam<\/span> team1-adsl<\/span>
      \nexit
      \ncommit
      \nyes<\/span><\/p>\n

      SNMP<\/span><\/p>\n

      edit system service snmp<\/span>
      \npublic-community roca
      \nexit
      \ncommit
      \nenable system service snmp<\/span>
      \ncommit<\/span><\/p>\n

      ADDRESS-ALIASES<\/span><\/p>\n

      add address-alias WWHQ<\/span>
      \ntype source
      \naddress 80.74.17.9\/32
      \nexit
      \nadd address-alias WWHQDSL<\/span>
      \ntype source
      \naddress 81.149.30.66\/32
      \nexit
      \nadd address-alias WWMGMT<\/span>
      \ntype source
      \naddress 80.74.16.8\/29
      \nexit
      \nadd address-alias WWXRIOXE<\/span>
      \ntype source
      \naddress 80.74.16.203\/32
      \nexit
      \nadd address-alias XRIODC<\/span>
      \ntype source
      \naddress 84.21.143.0\/24
      \nexit
      \nadd address-alias XRIOOFFICE<\/span>
      \ntype source
      \naddress 95.177.98.192\/28
      \nexit
      \nadd address-alias WatesMPLS<\/span>
      \ntype source
      \naddress 172.16.0.0\/11
      \nexit
      \ncommit
      \n<\/span><\/p>\n

      ACCESS RULES<\/span><\/p>\n

      add access-rule WWHQ<\/span>
      \nsource WWHQ<\/span>
      \nexit
      \nadd access-rule WWHQDSL<\/span>
      \nsource WWHQDSL<\/span>
      \nexit
      \nadd access-rule WWMGMT<\/span>
      \nsource WWMGMT<\/span>
      \nexit
      \nadd access-rule WWXRIOXE<\/span>
      \nsource WWXRIOXE<\/span>
      \nexit
      \nadd access-rule XRIODC<\/span>
      \nsource XRIODC<\/span>
      \nexit
      \nadd access-rule XRIOOFFICE<\/span>
      \nsource XRIOOFFICE<\/span>
      \nexit
      \nadd access-rule WatesSNMP<\/span>
      \nsource WatesMPLS<\/span>
      \nexit<\/span><\/p>\n

      remove access-rule<\/span> AllowSSH<\/span>
      \n remove access-rule<\/span> AllowHTTPS<\/span>
      \n remove access-rule<\/span> AllowSNMP<\/span>
      \n commit
      \nyes<\/span><\/p>\n

      config save<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

      SSH to the Management Server on\u00a080.74.17.43 Username: root Password: xr10p455w0rd Linux vm DHCP Server : SSH to the relevant IP, typically 172.31.3. Login with the following details : Username: admin Password: password Firmware Upgrade : You now need upgrade the firmware to the latest version. Type “firmware update http:\/\/172.31.3.254\/2.2\/rc3\/XrioUBM_2.2.110727.163001.bin“ If external use “firmware update http:\/\/80.74.17.43\/2.2\/rc3\/XrioUBM_2.2.110727.163001.bin“ […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[14],"tags":[779],"class_list":["post-2813","post","type-post","status-publish","format-standard","hentry","category-xrio","tag-xrio-3g"],"_links":{"self":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/2813","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/comments?post=2813"}],"version-history":[{"count":1,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/2813\/revisions"}],"predecessor-version":[{"id":5037,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/2813\/revisions\/5037"}],"wp:attachment":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/media?parent=2813"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/categories?post=2813"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/tags?post=2813"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}