{"id":811,"date":"2010-10-07T10:30:23","date_gmt":"2010-10-07T10:30:23","guid":{"rendered":"http:\/\/wiki.freeiz.com\/?p=811"},"modified":"2016-08-09T12:03:27","modified_gmt":"2016-08-09T12:03:27","slug":"cisco-aironet-1130-ap-2","status":"publish","type":"post","link":"https:\/\/wiki-see.info\/wp\/2010\/10\/07\/cisco-aironet-1130-ap-2\/","title":{"rendered":"Cisco Aironet 1130 AP"},"content":{"rendered":"

<\/p>\n

\n

infrastructure-ssid optional<\/span><\/strong> :<\/p>\n

Designate the SSID as an infrastructure SSID.\u00a0The repeater uses this SSID to associate to the
\nroot access point.\u00a0Infrastructure devices must associate to the repeater access point using this
\nSSID\u00a0unless you also enter the optional keyword.<\/span><\/p>\n

station-role repeater<\/span><\/strong> :<\/span><\/p>\n

Set the access point’s role in the wireless LAN to repeater<\/span><\/p>\n

Remove these 2 lines if wanting Access-Point as a standalone (not as a repeater) <\/span>:<\/p>\n

infrastructure-ssid optional<\/strong>
\nstation-role repeater<\/strong><\/span><\/strong><\/span><\/p>\n

Authenication WPA
\n<\/strong><\/span>!<\/span>
\ndot11 ssid\u00a0Llyglaspub<\/span><\/span>
\nauthentication key-management wpa<\/span>
\nwpa-psk ascii 7 06001C225B4B0B485C4341<\/span>
\n!<\/span>
\ninterface Dot11Radio0<\/span>
\nencryption mode ciphers aes-ccm tkip
\n!
\nssid\u00a0Llyglaspub<\/span><\/span>
\n<\/span>!<\/span><\/p>\n

Authentication open<\/strong><\/span>
\n!<\/span>
\ndot11 ssid\u00a0Llyglaspub<\/span><\/span>
\n authentication open <\/span>
\n guest-mode<\/span>
\n!<\/span>
\ninterface Dot11Radio0<\/span>
\n no ip address<\/span>
\n !<\/span>
\nssid\u00a0Llyglaspub<\/span><\/span><\/p>\n

\n

Configuration <\/span><\/strong>:
\n!
\nip dhcp excluded-address 10.0.0.1 10.0.0.2
\n!
\nip dhcp pool DATA<\/span>
\nimport all
\nnetwork 10.0.0.0 255.255.255.0
\ndefault-router 10.0.0.1
\ndns-server 10.0.0.1
\nlease 0 2
\nupdate arp
\n!
\n dot11 ssid Llyglaspub<\/span>
\nvlan 1
\nauthentication open
\nguest-mode
\n!
\npower inline negotiation prestandard source
\n!
\n interface Dot11Radio0<\/span>
\nno ip address
\nno ip route-cache
\n!
\nssid Llyglaspub
\n!
\nstation-role root access-point
\nworld-mode dot11d country GB outdoor
\n!
\ninterface Dot11Radio0.1<\/span>
\nencapsulation dot1Q 1 native
\n<\/strong> bridge-group 1
\nbridge-group 1 subscriber-loop-control
\nbridge-group 1 block-unknown-source
\nno bridge-group 1 source-learning
\nno bridge-group 1 unicast-flooding
\nbridge-group 1 spanning-disabled
\n!
\n interface FastEthernet0<\/span>
\nno ip address
\nno ip route-cache
\nduplex auto
\nspeed auto
\nbridge-group 1
\nno bridge-group 1 source-learning
\nbridge-group 1 spanning-disabled
\n!
\n interface BVI1<\/span>
\nip address 10.0.0.2 255.255.255.0
\nip access-group LAN<\/span> in
\nno ip route-cache
\n!
\nip default-gateway 10.0.0.1<\/span>
\nip http server
\nno ip http secure-server
\nip http help-path http:\/\/www.cisco.com\/warp\/public\/779\/smbiz\/prodconfig\/help\/eag
\nbridge 1 route ip<\/span><\/p>\n\n\n\n\n\n
Default SSID Configuration<\/span><\/caption>\n
<\/a><\/p>\n
Feature<\/div>\n<\/th>\n
<\/a><\/p>\n
Default Setting<\/div>\n<\/th>\n<\/tr>\n
<\/a>SSID<\/span><\/td>\n<\/a>tsunami<\/span><\/td>\n<\/tr>\n
<\/a>Guest Mode SSID<\/span><\/td>\n<\/a>tsunami (The access point broadcasts this SSID in its beacon and allows client devices with no SSID to associate.)<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/a>Creating an SSID<\/span><\/strong> <\/a><\/p>\n

Beginning in privileged EXEC mode, follow these steps to create an SSID<\/span>:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u00a0<\/caption>\n
<\/a><\/th>\n<\/a><\/p>\n
Command<\/div>\n<\/th>\n
<\/a><\/p>\n
Purpose<\/div>\n<\/th>\n<\/tr>\n
<\/a>Step\u00a01<\/td>\n<\/a>configure terminal<\/span><\/td>\n<\/a>Enter global configuration mode<\/span>.<\/span><\/td>\n<\/tr>\n
<\/a>Step\u00a02<\/td>\n<\/a>interface dot11radio { 0 | 1 <\/span>}<\/td>\n<\/a>Enter interface configuration mode for the radio interface. The 2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1<\/span>.<\/td>\n<\/tr>\n
<\/a>Step\u00a03<\/td>\n<\/a>ssid ssid-string<\/span><\/td>\n<\/a>Create an SSID and enter SSID configuration mode for the new SSID. The SSID can consist of up to 32 alphanumeric characters. SSIDs are case sensitive.<\/span><\/td>\n<\/tr>\n
<\/a>Step\u00a04<\/td>\n<\/a>authentication client\u00a0username
\npassword<\/span><\/td>\n		<\/a>(Optional) Set an authentication username and password that the access point uses to authenticate to the network when in repeater mode. Set the username and password on the SSID that the repeater access point uses to associate to a root access point, or with another repeater<\/span>.<\/td>\n<\/tr>\n
<\/a>Step\u00a05<\/td>\n<\/a>accounting list-name<\/span><\/td>\n<\/a>(Optional) Enable RADIUS accounting for this SSID. For list-name, specify the accounting method list. Click this link for more information on method lists<\/span>: \/en\/US\/docs\/ios\/12_2\/security\/configuration\/guide\/scfacct.html#xtocid2<\/a><\/td>\n<\/tr>\n
<\/a>Step\u00a06<\/td>\n<\/a>vlan vlan-id<\/td>\n<\/a>(Optional) Assign the SSID to a VLAN on your network. Client devices that associate using the SSID are grouped into this VLAN. You can assign only one SSID to a VLAN.<\/td>\n<\/tr>\n
<\/a>Step\u00a07<\/td>\n<\/a>guest-mode<\/td>\n<\/a>(Optional) Designate the SSID as your access point’s guest-mode SSID. The access point includes the SSID in its beacon and allows associations from client devices that do not specify an SSID.<\/td>\n<\/tr>\n
<\/a>Step\u00a08<\/td>\n<\/a>infrastructure-ssid [optional]<\/strong><\/td>\n<\/a>(Optional) Designate the SSID as the SSID that other access points and workgroup bridges use to associate to this access point. If you do not designate an SSID as the infrastructure SSID, infrastructure devices can associate to the access point using any SSID. If you designate an SSID as the infrastructure SSID, infrastructure devices must associate to the access point using that SSID unless you also enter the optional keyword.<\/td>\n<\/tr>\n
<\/a>Step\u00a09<\/td>\n<\/a>s<\/strong>tatio<\/strong>n-role repeater<\/strong> <\/strong><\/td>\n<\/a>Set the access point’s role in the wireless LAN to repeater<\/td>\n<\/tr>\n
<\/a>Step\u00a010<\/td>\n<\/a>copy running-config startup-config<\/strong><\/td>\n<\/a>(Optional) Save your entries in the configuration file.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n","protected":false},"excerpt":{"rendered":"

infrastructure-ssid optional : Designate the SSID as an infrastructure SSID.\u00a0The repeater uses this SSID to associate to the root access point.\u00a0Infrastructure devices must associate to the repeater access point using this SSID\u00a0unless you also enter the optional keyword. station-role repeater : Set the access point’s role in the wireless LAN to repeater Remove these 2 […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3],"tags":[19,61,62,148,161],"class_list":["post-811","post","type-post","status-publish","format-standard","hentry","category-cisco-routers","tag-1130-ap","tag-aironet","tag-aironet-1130","tag-cisco-1130","tag-cisco-aironet"],"_links":{"self":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/811","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/comments?post=811"}],"version-history":[{"count":1,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/811\/revisions"}],"predecessor-version":[{"id":4764,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/posts\/811\/revisions\/4764"}],"wp:attachment":[{"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/media?parent=811"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/categories?post=811"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wiki-see.info\/wp\/wp-json\/wp\/v2\/tags?post=811"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}