snmp-server host outside 80.74.17.9 poll community netmangler version 2c
snmp-server location London
snmp-server contact Waveworks
snmp-server community netmangler
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

Configuration Example for SNMP Versions 1 and 2c

The following example shows how the ASA can receive SNMP requests from
host 192.0.2.5 on the inside interface, but does not send any SNMP syslog requests
to any host:

snmp-server host 192.0.2.5
snmp-server location building 42
snmp-server contact EmployeeA
snmp-server community ohwhatakeyisthee

Configuration Example for SNMP Version 3

The following example show how the ASA can receive SNMP requests using the
SNMP Version 3 security model, which requires that the configuration follow
this specific order: group, followed by user, followed by host:

snmp-server group v3 vpn-group priv
snmp-server user admin vpn group v3 auth sha letmein priv 3des cisco123
snmp-server host mgmt 10.0.0.1 version 3 priv admin


Provides 3DES or AES encryption and support for SNMP Version 3, the most secure
form of the supported security models. This version allows you to configure users,
groups, and hosts, as well as authentication characteristics by using the USM.
In addition, this version allows access control to the agent and MIB objects, and
includes additional MIB support.

To obtain a list of the supported SNMP MIBs for a specified ASA,
enter the following command:

hostname(config)# show snmp-server oidlist

The following commands were introduced:

show snmp-server engineid
show snmp-server group
show snmp-server user
snmp-server group
snmp-server user