Zyxel Configuration

Edit Zyxel Configuration

ras> sys edit autoexec

EDIT cmd: q(uit) x(save)d(delete)r(replace)

sys errctl 0
sys trcl level 5
sys trcl type 1180
sys trcp cr 64 96
sys trcl sw off
sys trcp sw off
ip tcp mss 512
ip tcp limit 2
ip tcp irtt 65000
ip tcp window 2
ip tcp ceiling 6000
ip rip activate
ipsec swSkipOverlapIp
swSkipOverlapIp on
ipsec timer chk_conn 0
ppp ipcp compress off
sys wdog sw on
ip icmp discovery enif
bridge mode 1
sys quick enable
wan adsl rate off
ether driver qroute 2
EOF

wan adsl rateadap on
Line-Rate Adaptive mechanism is for ADSL CPE system which try to
reach the maximum line rate that DSLAM can provide.

The drawback is ADSL CPE system has to force the line to drop and then sync up with
maximal rate. But actually the line rate is decided by DSLAM.
When this mechanism is turned on, CPE will monitor the line rate and
record maximum line rate. Once the line rate is lower than the
maximum value which CPE system recorded before, system will drop the
line and try to sync with better line rate.

Show Commands :

wan adsl opmode = DSL standard: ADSL_G.dmt
wan adsl driver setphy disp
wan adsl rateadap on
wan adsl chandata
wan adsl linedata near
wan adsl driver setphy disp
wan adsl driver info
wan adsl statuswan
wan adsl close
wan adsl open

DSL Operating Mode :