XRIO 3G VBOND
3G TUNNELS
add tunnel siteref-3g1
type tcp
endpoint-remote 0.0.0.0
endpoint-local coreEndpoint
virtual-remote 10.X.1.1 – this value should match virtual-local value set on UBM tunnel
virtual-local 10.X.1.2 – this value should match virtual-remote value set on UBM tunnel
download 1000
upload 1000
compress disable
encrypt disable
encrypt-key ABC123
exit
commit
Repeat process for additional tunnel using siteref-3g2 as the second tunnel name
3G TEAM
add team siteref-3g
algorithm distribute
add member tunnel siteref-3g1
exit
add member tunnel siteref-3g2
exit
exit
commit
yes
ADSL TUNNELS
add tunnel siterefmaxbond1
type gre
endpoint-remote <IP OF ADSL CONNECTION>
endpoint-local coreEndpoint
virtual-remote 10.X.1.1 – this value should match virtual-local value set on UBM tunnel
virtual-local 10.X.1.2 – this value should match virtual-remote value set on UBM tunnel
download 8000
upload 1000
exit
commit
Repeat process for additional tunnels
ADSL TEAM
add team siteref-adsl
algorithm static_bonding
add member tunnel siterefmaxbond1
exit
add member tunnel siterefmaxbond2
exit
backup_team siteref-3g
exit
commit
yes
ADDRESS
- add address sitereflan
- type destination
- address 10.2.X.0/24
- exit
- commit
- yes
POLICY
- add policy siterefpol
- destination sitereflan
- team siteref-adsl
- exit
- commit
- yes
exit
config save
Checking Configuration
Configuration can be checked by running the following show commands…
- Show tunnels
- Show teams
- Show link
- Show policy
- Show address
You should also be able to ping the LAN IP of the UBM from the Wates Xrio server.
Check that you get full DHCP from the UBM using the Support laptop.